Cabletron Systems 7F06-02

2-1

CHAPTER 2

NETWORK REQUIREMENTS

Before installing Cabletron Systems 7F06-02 Module, review the

network requirements outlined in this chapter. All requirements

included in this chapter should be met to ensure satisfactory

performance of the 7F06-02 Module. Failure to do so may result in

unsatisfactory network performance.

Appendix A

2.1 FPIM MODULE SPECIFICATIONS

This module uses Fiber Port Interface Modules (FPIM) to provide

front panel cable connections. The FPIMs are user-installable. See

Section 3.2

INSTALLING FPIMS.

2.1.1 FPIM-00 and FPIM-01

The FPIM-00 and FPIM-01 provide a multimode ﬁber connection.

The FPIM-00 uses a MIC style connector and the FPIM-01 uses an

SC type connector. The speciﬁcations for both devices are listed in

Table 2-1.

Table 2-1. FPIM-00 and FPIM-01 Speciﬁcations

Parameter Typical

Value

Worst

Case

Worst

Case

Budget

Typical

Budget

Receive

Sensitivity -30.5 dBm -28.0 dBm — —

Peak Input

Power -7.6 dBm -8.2 dBm — —