Cabletron Systems 9E106-06 manual Reset Switch, Installing an Epim

Installing the 9E106-06 Module

Mounting

Screw

Figure 2-3. Installing an EPIM

The Reset Switch

The Reset Switch is located on the front panel, under the top plastic tab, as shown in Figure 2-4.It serves two functions:

•Pressing the Reset Switch twice within three seconds resets the module.

•Pressing and holding the switch on for three or more seconds causes the module to shutdown. Pressing and holding the switch again for three seconds restarts the module.

SNMP management may be used to disable this switch to enhance module security.

2-5