Cabletron Systems 9E106-06 , See the , , at the end of this table., Cautions,

2-9

Installing the 9E106-06 Module

See the Cautions at the end of this table.

Table 2-2. Function of DIP Switch

Switch Function Description

8Clear

Password

-1

This module stores user entered passwords in NVRAM

(Nonvolatile Random Access Memory). To clear these

passwords, toggle this switch and then reset the module’s

processor. Once the module resets, factory default passwords

are placed in NVRAM. You can use these default passwords

or, if desired, enter new passwords. To enter new passwords,

refer to the Module Local Management User’s Guide.

7Clear

NVRAM

-2

This module stores user entered parameters such as IP

addresses, subnet masks, default gateway, default interface,

SNMP traps, bridge conﬁgurations and module speciﬁc

conﬁgurations in NVRAM. To clear these parameters toggle

this switch and then reset the module’s processor. Once the

module resets, factory default parameters are placed in

NVRAM. You can use the default parameters or, if desired,

enter new parameters. To enter new parameters, refer to the

Module Local Management User’s Guide.

Force

BOOTP

Download

This module uses BOOTP (Boot Strap Protocol) to download

new versions of the image ﬁle into Flash Memory. This

procedure forces image ﬁles to be downloaded from the PC

or Workstation, conﬁgured to act as the BOOTP server,

connected to the EPIM port in the Environmental Module.

5 Reserved

For Factory Use Only

4 Reserved

For Factory Use Only

3 Reserved

For Factory Use Only

2 Reserved

For Factory Use Only

1 Reserved

For Factory Use Only

Caution: Do not toggle Switch 8 unless you intend to reset the user conﬁgured passwords to the factory default settings.Caution: Do not toggle Switch 7 unless you intend to reset the user parameters to the factory default settings.

CAUTION