General Configuration Screen
The General Configuration Screen (Figure 1), displays information about the selected module and allows you to set the following general parameters:
•Module Date and Time
•Screen Refresh and Lockout Time
•Host IP Address
•Subnet Mask
•Default Gateway and Interface
•TFTP Gateway IP Address
SmartSwitch 9000 Local Management |
| |
| General Configuration |
|
Module Name: | Firmware Revision: 01.00.00 | |
Slot Number: 8 | BOOTPROM Revision: 01.01.01 | |
Module Serial #: | Module Date: | 08/11/1997 |
Module Board Revision: | Module Time: | 10:18:31 |
| Screen Refresh Time: 03 sec | |
| Screen Lockout Time: 15 min | |
FLASH Memory: 4 MB |
|
|
| Host IP Address: | XXX.XXX.XXX.XXX |
| Subnet Mask: | 255.255.0.0 |
| Default Gateway: | NONE DEFINED |
| Default Interface: | NONE DEFINED |
| Base MAC Address: | |
| TFTP Gateway IP: | 0.0.0.0 |
SAVE | EXIT | RETURN |
Figure 1. General Configuration Screen
3
