CHAPTER 2
INSTALLATION
This chapter explains how to install the EMC39-12 in a 19-inch rack and also provides requirements for installing the EMC39-12 on a tabletop or shelf.
2.1 UNPACKING THE EMC39-12
Unpack the EMC39-12 as follows:
1.Remove the shipping box material covering the EMC39-12.
2.Carefully remove the EMC39-12 from the shipping box.
3.Remove the EMC39-12 from its non-conductive bag. If you notice any signs of damage, contact Cabletron Systems Technical Support immediately.
2.2 INSTALLING THE EMC39-12
Do not remove the cover from the EMC39-12. There are no
!user configurable devices inside and the electronics are static CAUTION sensitive.
You can install the EMC39-12 in a 19-inch rack or place it on any horizontal surface (e.g. a table or shelf). Cabletron Systems provides an accessory kit with the EMC39-12 that includes Rackmount Brackets and Mounting Screws.
The following sections provide instructions for installing the EMC39-12. Select one of the following subsections and perform the steps that are applicable to your installation needs.
EMC39-12 User’s Guide | Page 2-1 |
