Cabletron Systems manual Connecting the EMC39-12 to the Power Source

Chapter 2: Installation

2.3CONNECTING THE EMC39-12 TO THE POWER SOURCE

NOTE

The EMC39-12 has a universal power supply. This allows you to connect the EMC39-12 to power sources from 100 Vac to 125 Vac, 50-60 Hz or 200 Vac to 240 Vac, 50-60 Hz

To connect the EMC39-12 to the power source:

1.Plug the power cord into the back panel of the EMC39-12.

2.Plug the other end of the power cord into a grounded wall outlet.

3.Verify that the PWR LED is on; this indicates that the EMC39-12 is receiving power.

Page 2-4 EMC39-12 User’s Guide