Cabletron Systems MRXI 10BASE-T , CHAPTER 3 GETTING STARTED

GETTING STARTED
Page 3-1
CHAPTER 3
GETTING STARTED
This chapter explains the conventions used by this manual to describe
each of the screens and commands available with MRXI/LM. It also
describes using the keyboard and the initial steps required to access
MRXI/LM.
3.1 USING THE MANAGEMENT KEYBOARD
The MRXI/LM screens are arranged with pertinent network
information filling much of the display area and several menu
selections across the bottom. To select a menu option or alter a field,
use the keyboard arrows (up, down, left, and right) to highlight the
desired item. Only fields that can be changed can be highlighted.
Incorrect entries (field value exceeded, etc.) are blocked and result in
an appropriate error message (refer to Chapter 6,
MRXI/LM
Messages ).
To make a menu selection:
1. Highlight the menu selection
2. Press Return
To alter a field:
1. Highlight the desired field
2. Enter the new information
3. Press Return
To toggle a field (select the alternative selection for a field):
1. Highlight the desired field
2. Press Return
• The TAB key performs the same function as the right arrow.
• Backspace permits correction of entries.