Using the Hub View 2-3
Using the SEHI100TX Hub View
Uptime
The time that the device has been running without interruption. The counter
resets to 0 days 00:00:00 (HH:MM:SS) when one of the following occurs:
¥ Power to the device is cycled.
¥ The device is reset manually.
Date and Time
The date and time are taken from the deviceÕs internal clock. You can set the
device date and time using the Device Status window; refer to page 2-10 for
details.
Device Name
A text Þeld that you can use to help identify the device. You can edit the device
name using the Device Status window; refer to page 2-10 for details.
Location
A text Þeld that you can use to help identify the device. You can edit the device
location using the Device Status window; refer to page 2-10 for details.
IP Address
The deviceÕs Internet Protocol address. You cannot change the SEHI100TXÕs IP
address from SPMA.
MAC Address
The deviceÕs factory-set hardware address. The MAC address cannot be changed.
NOTE
If you have assigned a device name or location that contains more than 18 characters, only
the last 18 will be displayed in the Hub View. Check the Device Status window for the
complete name and/or location, if necessary.