Using the SEHI100TX Hub View

2-12 Monitoring Hub Performance

Chassis Type
Displays the type of chassis used for the device (stand-alone).
Checking Module Status
You can open a Module Status window (Figure 2-7) for any device in the
SEHI100TX-controlled stack. To open the Module Status window:
1. Click mouse button 1 in the Module Index box. (Use the scroll bar to the right
of the ports display to scroll through the available modules.)
or
1. Click mouse button 3 in the Module Index box to display the Module menu.
2. Drag down to Status and release.
Figure 2-7. The Module Status Window
NOTE
If your device Þrmware can accept four-digit year values, the Date Þeld will allow you to
enter the year portion in one-, two-, or four-digit format. If you choose to enter one or two
digits for the year, any value greater than or equal to 88 will be presumed to be in the
1900s; a value of 87 or less is presumed to be in the 2000s. No matter which entry format
you choose, the year will still be displayed and set as a four-digit value.
If your device Þrmware cannot accept four-digit year values, the Date Þeld will allow you
to enter the year portion in one- or two-digit format (with leading zeros supplied
automatically for single-digit entries). No presumption is made about the century, and
any two-digit year value (from 00 to 99) will be accepted.
Attempts to set the date may result in one of three different error messages. Two of these
messages will indicate that the wrong number of digits has been used for the year value,
and will indicate the appropriate number of digits to use for the selected device; the third
message will indicate that the entered date is invalid because it is not an actual calendar
date (such as 02/29 in a non-leap year, any month value greater than 12, or any day value
greater than 31).