SEHI100TX Firmware 1-7
Introduction to SPMA for the SEHI100TX-22
For additional information about Cabletron Systems products, visit our
World Wide Web site:
http://www.cabletron.com/
. For technical support,
select
Service and Support
.
SEHI100TX Firmware
SPMA support for the SEHI100TX has been tested against Þrmware version
1.00.06; if you have an earlier version of Þrmware and experience problems
running SPMA, contact Cabletron Systems Global Support Center for upgrade
information.
Year 2000 Compliance
Previous users of SPMA will note a few display changes related to Year 2000
compliance. All SPMA applications now have the ability to display a four-digit
year value where this information is available. For example, the Stand-alone
Launcher window Ð which uses your workstationÕs system time value to display
the time and date of the last contact change Ð will now display these date values
with eight digits (05/31/1998) instead of six (05/31/98).
Please keep in mind, however, that SPMAÕs ability to
display
a four-digit year
value in device-speciÞc windows Ð such as the Device Status window available
from the Hub View or the Bridge View Ð is dependent on the ÞrmwareÕs ability to
provide
a four-digit value. Not all Þrmware versions support this ability; contact
Cabletron SystemsÕ Global Call Center for information speciÞc to your device
Þrmware.
NOTE
As a general rule, Þrmware versions for new products are liable to change rapidly; contact
the Cabletron Systems Global Support for upgrade information for the latest customer
release of Þrmware.