i
4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ONa. Use only a ULdistedsurge protector, rated at 15 arnp8, with a 14-gauge cord of five feet or less in length.b. If the walking belt is o_,edlghtened, treadmill performance may
decrease and the walking belt may be perrnanenlty d_roaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly tightened,
you should be able to lift each side of the walking belt 3to 4
inches off the walking platform. The center Of the walking belt
should just touch the walking platform. Be careful to keep the
walking belt centered. Plug in the power cord, insert the key and
run the treadmilr for a few minute@. Repeat until the walking belt
is properly tightened.
¢. If the walking belt still alows when walked on, please call our toll-free Customer Service Depadment.
5. SYMPTOM: THE WALKING BELT IS OFF-CENTER WHEN WALKED ON
a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt c]ockwise, and the dgth bolt coun-
terclockwise, 1/4 of a turn each. Be carefur not to overtlghten the
walking belt. Plug in the power cord, insert the key and run the
treagroiil for a few roinutes. Repeat until the walking bait is cen-
tered.
b. If the walking belt has shifted to the dght, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench,
turn the left rear miler adjustroect bolt counterclockwise, and the
right bolt clockwise, 1/4 of a turn each. Be careful not to over-
tighten the walking belt, Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the walkthg
belt is centered.
¢. If the walking belt allpo when walked on, first remove the key
and UNPLUG THE POWER CORD, Using the allenwrench,
turnbethrear rolleradjustmectbeltsclocl_'_ise,I/4of aturn,
When the walking beltIscorrecllytightened,you should be able
tolifteach sideofthe walkingbelt3 to4 inchesof_thewaI_ng
platform.Tn_ centerofthe walkingbertshouldjusttouchthe
welkingpi_orm. Be carefultoKeep thewalking beltcentered.
Plugin thepower oord,Insertthekey and ru_ thetreadmillfora
few minutes.Repeat _nlttthe wa_ing belt_ pmpo_y tightened.
I@