IMPORTANT!

It is extremely impor- tant that you verify the electrical power to be supplied to the heater is the same voltage as the heater. Connecting a heater to a lesser voltage

SMART-BASETMThermostat

Installation Instructions

SBFT2

PLEASE READ THROUGH THESE INSTRUCTIONS BEFORE

PROCEEDING WITH INSTALLATION OF THE “SBFT2”

THERMOSTAT INTO A CADET SERIES “F” BASEBOARD

Tools Required: Phillips Screwdriver, Insulated Wire

Connectors (Wire Nuts®), Wire Strippers, Wire Cutters

IMPORTANT INFORMATION

WARNING

Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock or tag the panel board door to prevent someone from turning on power while you are working on the heater. Failure to do so could result in serious electrical shock, burns, or possible death.

Installation Instructions

supply than is intend- ed will reduce the heater's output, and connecting it to a greater voltage sup- ply than it is intended can cause property damage and personal injury. The electron- ic thermostat will only function cor- rectly on 240 & 208 volt circuits.

For All Applications

The thermostat needs to be mounted into the same junc- tion box (wiring compartment) as the supplied electrical power. If the supplied case ground conductor is not in this junction box it will need to be relocated to the end wired.

The installation of the SMART-BASE thermostat may require a slight adjustment of the panel across the front of the heater, to allow the thermostat to fit into the junction box unobstructed. To do so, remove both junction box cov- ers and unlatch the bottom of the panel from its hangers. (Use a rubber-coated tool, or hammer handle to remove the panel. Carefully pry upward to remove.) Next, slide it back out of the junction box opening to be used for the thermostat until its edge is just hanging over the partition. Hold the panel and snap it back on to its hangers. The thermostat will now have enough room to fit into the junc- tion box opening.

Replacing Existing BTF Thermostat Control

1.Remove screw attaching the existing BTF assembly (thermostat and plate) to the baseboard case and care- fully pull it back to expose the wiring and connections. (Test with meter or circuit tester to verify that no electri- cal power is present before proceeding.)

2.If the power supply has been brought into the base- board at this junction box, undo the wiring connections and remove the old thermostat assembly. Follow the appropriate wiring diagram (“FIGURE A” for left end

attachment, “FIGURE B” for right end attachment) and the following instructions “Baseboard/Thermostat Wiring” below to connect the SBFT2 to the baseboard and power supply.

3.If the power supply has not been brought into the base- board at this junction box, remove the old thermostat assembly by removing the wiring connections. The new thermostat (SBFT2) must be located in the same junction box as the supplied electrical power; therefore, strip 1/2" of insulation from the two loose leads (created when the thermostat was removed) and join the two wires back together using a wire connector. Remove the end plate from the other junction box and apply it to the junction box where the thermostat was removed. Follow the appropriate wiring diagram (“FIGURE A” for left end attachment, “FIGURE B” for right end attachment) and the following further instructions “Baseboard/Thermostat Wiring” to connect the SBFT2 to the baseboard and power supply.

As Part of New Installation

Install the Cadet “F” series baseboard heater according to the installation instructions supplied with the product. Keep in mind the SBFT2 thermostat needs to be mounted into the same junction box (wiring compartment) as the supplied electrical power. If the supplied case ground conductor is not in this junction box it will need to be relocated to the end wired.

SAVE THESE INSTRUCTIONS

TEL: 360-693-2505 Fax: 360-694-8668 P.O. Box 1675 Vancouver, WA 98668-1675

©2005 Cadet Manufacturing Co.

Printed in U.S.A. 12/05 #720004

Page 1
Image 1
Cadet SBFT2 installation instructions Important Information, Installation Instructions, For All Applications

SBFT2 specifications

The Cadet SBFT2 represents a significant advancement in the realm of small form-factor computers, perfectly blending portability with powerful performance capabilities. This compact device is designed to cater to the needs of both casual users and professionals who demand reliability and efficiency in a mobile format.

At its core, the Cadet SBFT2 is powered by the latest generation of processors, ensuring high-speed performance and smooth multitasking. These processors are engineered to handle demanding applications, from graphic design and video editing to software development and gaming. Coupled with ample RAM, the SBFT2 provides a seamless experience, allowing users to run multiple applications without the dreaded lag that often plagues less capable devices.

One of the standout features of the Cadet SBFT2 is its impressive storage options. Users can choose between SSD and HDD configurations, optimizing their device for speed or capacity according to their specific needs. The SSD option ensures lightning-fast load times and quick access to files, making it ideal for professionals on the go. On the other hand, the HDD option offers substantial storage space for those who need to store large amounts of data, such as media files or software libraries.

Port connectivity is another area where the Cadet SBFT2 excels. It comes equipped with a variety of ports, including USB-C, USB 3.0, HDMI, and Ethernet, ensuring versatility for different peripherals and displays. Whether it’s connecting to a monitor for an extended work environment or peripheral devices like printers and external storage, the SBFT2 caters to a multitude of connectivity requirements.

The device also prioritizes thermal management, featuring advanced cooling technologies that prevent overheating during intense tasks. This ensures longevity and reliability, crucial for users who rely heavily on their devices for extended periods.

Finally, the Cadet SBFT2 boasts a sleek and modern design, making it an attractive choice for users who value aesthetics as much as function. Its lightweight build makes it highly portable, fitting easily into backpacks or laptop cases, making it an excellent companion for travel or commuting.

In summary, the Cadet SBFT2 is a remarkable blend of performance, versatility, and design. With its powerful processing capabilities, flexible storage options, extensive connectivity features, and efficient thermal management, it stands out as a leading choice for anyone in search of a compact yet powerful computing solution. Whether for work, study, or leisure, the SBFT2 is engineered to meet the demands of today's dynamic digital landscape.