Cal Spas GFCI Programming the Universal Remote Control, Using the iPod Docking Station, Code

Using the Entertainment System

Programming the Universal Remote Control

The Cal Spas universal remote has been pre-pro- grammed to function with the entertainment system the spa has been configured with. However, in case you need to reprogram the remote, use the device list below for the programming code.

1.Turn on the device (TV, CD player, DVD player) with the manufacturer’s remote control.

2.Press the button on the remote for the device you want to program (TV, CD, DVD, etc.)

3.Press and hold the SETUP button until the LED blinks twice.

4.Enter the device code. If you perform this procedure correctly, the LED will blink twice. If not, repeat steps 2 and 3.

Device Manufacturer	Device Type	Code
Samsung 42” plasma	TV	1312
River Park 20”	TV	1530
Aeware	DVD	1866
Sony CDX-GT10M	CD
Sony CDX-HS70MW	CD

Using the iPod Docking Station

To play an iPod from the docking station to the spa’s stereo system:

1.Place the iPod in the docking station.

2.Press the SOURCE button on the stereo (if equipped) until the display shows AUX.

3.Play the iPod.

4.Adjust volume using the volume control in the docking station.

Page 36 2008 Portable Spa Owner’s Manual

LTR20081000, Rev. D