Cal Spas LTR20111002 manual Fast Sheen Spa finish protecting wax

Fast Sheen (Spa finish protecting wax)

Cal Spas™ Fast Sheen is an essential part of main- taining your spa’s finish. Through normal use, the spa’s finish can accumulate dirt, oil, and calcium, causing a rough feel and unsightly scum lines. Cal Spas™ Fast Sheen is a non-oil based wax that is spe- cifically formulated to protect the spa’s finish from the chemicals and minerals associated with normal spa use.

The most effective solution to minimize cleaning time is prevention. When the following steps are followed, the spa’s finish will actually start to resist most of the elements that cause calcium build-up and make scum line clean-up easier.

Prior to Spa Start-Up and Refilling

1.Spray Cal Spas™ Multi-Purpose Cleaner directly to the spa’s finish.

Inground Spas

2.Wipe clean with a soft cloth.

3.Repeat on heavily calcified areas.

4.Wipe spa thoroughly with a wet sponge, rinsing often in a bucket of clean water.

5.Allow the spa to dry completely.

6.Apply a coat of Cal Spas™ Fast

Sheen to the spa’s entire finish with a soft cloth or sponge.

7.Allow Fast Sheen to dry until white and pow- dery.

8.Buff clean with a soft cloth, rotating frequently.

IMPORTANT: Cal Spas™ Fast Sheen should not be used on spas full of water. Only apply to clean, cool, dry surfaces. Incorrect product usage may cause water clarity issues.

41 Cleaningand Maintenance

LTR20111002, Rev. A www.calspas.com