Califone DVD105 operation manual Setting for Video, Setting for Audio

SETTING FOR VIDEO

Select VIDEO after pressing the SETUP button.

•The VIDEO SETUP allows you to set the display according to the playback conditions.

System Settings

The TV system menu allows the user to specify the display configuration of the TV monitor. Use RETURN and the "￿"/ "￿" buttons to select the appropriate settings.

•NTSC specifies display output in NTSC format.

•PAL specifies display output in PAL format

		SYSTEM NTSC
LANG	￿	ASPECT 4 : 3 PS
VIDEO	￿	OUTPUT S-VIDEO
AUDIO	￿
CHILD	￿
OTHER ￿
EXIT

Aspect

This menu allows the user to select the aspect ratio of the TV to be connected. Use RETURN and the "￿"/ "￿" buttons to select the appropriate settings.

•4:3 LETTER BOX : Use this when you connect a normal TV to the player. This displays a wide picture with bands displayed on the upper and lower portions of the screen.

•4:3 PAN SCAN : Use this when you connect a normal TV to the player. This displays the wide picture on the whole screen with a portion automatically cut off.

•16:9 WIDE SCREEN : Use this when you connect a wide-screen TV to the player.

•Depending on the DVD, 4:3 LETTER BOX may be selected automatically instead of 4:3 PAN SCAN and vice versa.

Video Output (Fixed)

SETTING FOR AUDIO			ANALOG 2 CH
Select AUDIO after pressing the SETUP button.	LANG	￿	DIGITAL	DOLBY DTS
	VIDEO	￿	D.R.C.	ON
• The AUDIO SETUP allows you to set audio preferences
	AUDIO ￿		BASS	OFF
according to the playback conditions.
	CHILD	￿
Source Menu	OTHER ￿
	EXIT
The Digital Menu allows the user to select the preferred source.

•Use the "￿"/ "￿"/ "￿"/ "￿" cursor buttons to select DIGITAL, then press ENTER. By using "￿"/ "￿" buttons, the user can select either DOLBY DTS or LPCM. Press ENTER to finalize your selection. LPCM is uncompressed data, so none of stream information is lose. However, LPCM output can only support 2 channel ouput. DIGITAL DTS is compressed data which can be converted to 5.1 channels. During the compression, however, some of the data is lost.

DRC (Dynamic Range Control)

Dynamic Range Control produces a clear sound with the volume turned down.

• Use the cursor buttons "￿"/ "￿" to turn the DRC ON or OFF.

BASS Menu

The Size menu allows the user to select the size of speakers. Use the "￿"/ "￿"/ "￿"/ "￿" cursor buttons to select BASS, then press ENTER. By using "￿"/ "￿" buttons, the user can select either LARGE, SMALL or OFF. Press ENTER to finalize your selection.

•LARGE : Normally select this option.

•SMALL : When the sound cracks or the effect of the surround is difficult to hear, select this option. This activates the Dolby digital bass redirection circuitry and outputs the bass frequencies of the speaker from subwoofers.

•OFF : Select this option for audio output without bass.

Recommended Digital Audio Output settings.

The optimum digital output setting depends on th the type of component connectd to the digital audio output connector.

•When connecting an amplifier with a coaxial digital input connector which does not contain the Dolby digital (AC-3) or DTS decoder, be sure to select "LPCM" at the Digital Menu.

20