Powered Companion Speaker PA919PS

 

 

Powered Companion Speaker PA919PS

 

 

 

 

 

 

 

The PA919PS works with the PA919 series and M319 and Q319 microphones. It is not compatible with the PA916 series, M-316 and Q-316 microphone.

The Powered Companion PA has the same amplifier, power supply and speaker compliment as the full featured PA919 or PA919SD. It does not have the mixer panel because it can be controlled by the PowerPro PA919SD and PA919.

With the integral 16-channel selectable wireless UHF receiver, it can function as a stand alone PA speaker when using a Q319 Handheld microphone or the M319 Beltpack transmitter with a LM-316, CM-316 or HBM-316 microphone. Although there are 5 LEDs on the front of the PA919PS only 3 lights function on this unit because there is only one receiver. The red LED indicates RF, the amber LED is for audio, and the green LED indicates power On.

Full Wireless Operation

As the transmitter on the PA919 and PA919SD is preset on channel 13, the receiver of the PA919PS is also set on 13. Any audio from the PA919SD can be transmitted to the PA919PS without wiring. There is no limit on the number of PA919PS speakers that can be used with the PA919 within a range of 150 feet.

Audio Line Buss

When linking one or two PA919PS to the PowerPro PA919SD via audio line, the PSC-50 XLR cable is connected to Audio Line Out XLR connector on the PA919SD. The other end is connected to Line In XLR on the Powered Companion Speaker.

The Master Volume Control on the Audio Line panel of the master will adjust the PowerPro PA919SD as well as all the Powered or Passive Companion Speakers, however the loudness needs to be adjusted via the Master Volume Control on the PA919PS as well.

Note: The mute switch on the PA919SD will silence all speakers connected to it by cable. However in the full wireless mode using the transmitter of the PowerPro the mute will have no effect.

1

4

 

3

 

 

 

 

 

 

 

 

5

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

16

 

 

 

 

 

 

 

 

10

11

12

13

 

14

 

 

1Telescoping Handle

216-channel UHF wireless mic receivers

3Audio Line Out XLR

4Treble Control

5Bass Control

6Digital Master Volume

7Dual Steel Skid Guards

8A/C Power Socket

9Battery Low/Charge Indicators

10Green Power On Indicator

11Power On/Off Switch

12Voice Priority (Ducking) Switch

131/4” Phone Jack Speaker Out

141/4” Phone Jack Speaker Out Switched

15Speaker Mute Switch

16Integral Wheels

17

18

califone_919SD_manual_rev1.indd 20-21

6/22/09 1:22 PM

Page 10
Image 10
Califone PA919SD owner manual Powered Companion Speaker PA919PS, Full Wireless Operation, Audio Line Buss