Decode modes - 5.1 speaker setup
|
| Pro Logic II/ |
| Dolby Digital EX/ |
|
|
| Neo 6 |
| DTS ES |
|
|
|
|
|
|
|
Incoming | Native | Modes | Output | Modes | Output |
audio | channel | (button cycles round) | channels | (button cycles round) | Channels |
format | resolution |
|
|
|
|
|
|
|
|
|
|
PCM | 2 | PLII Movie | >5.1 | PCM | 2 " |
| (5.1 | PLII Music | >5.1 |
|
|
| if PLII | PLII Game | >5.1 |
|
|
| encoded) | Neo:6 Cinema | >5.1 |
|
|
|
| Neo:6 Music | >5.1 |
|
|
|
|
|
|
|
|
Dolby Digital (2/0) | 2 | Dolby Digital (2/0) + PLII Movie | >5.1 | Dolby Digital (2/0) | 2 |
|
| Dolby Digital (2/0) + PLII Music | >5.1 |
|
|
|
| Dolby Digital (2/0) + PLII Game | >5.1 |
|
|
|
|
|
|
|
|
Dolby Digital (3/2) | 5.1 |
|
| Dolby Digital (3/2) | 5.1 |
|
|
|
|
|
|
Dolby Digital EX (3/3) | 6.1 |
|
| Dolby Digital EX (3/3) | 5.1< |
|
|
|
|
|
|
DTS (2/0) | 2 |
|
| DTS (2/0) | 2 |
|
|
|
|
|
|
DTS (3/2) | 5.1 |
|
| DTS (3/2) | 5.1 |
|
|
|
|
|
|
DTS ES Matrix (3/3) | 6.1 |
|
| DTS ES Matrix (3/3) | 5.1< |
|
|
|
|
|
|
DTS ES Discrete (3/3) | 6.1 |
|
| DTS ES Discrete (3/3) | 5.1< |
|
|
|
|
|
|
DSP
Modes | Output channels |
(button cycles round) |
|
|
|
Movie | >5.1 ! |
Music | >5.1 % |
Room | >5.1 ! |
Theatre | >5.1 ! |
Hall | >5.1 ! |
|
|
Pressing a mode button will first cause the 540R v3 to scroll the current decode mode across the front panel display. Pressing the mode button again whilst text is scrolling on the display or within 4 seconds of it finishing will select and display the next available mode.
Stereo
Modes
Modes | Output channels |
(button cycles round) |
|
|
|
Stereo | 2 |
|
|
Stereo + Sub | 2.1 |
|
|
Either native Stereo or downmix of DD/DTS 5.1/6.1 etc.
Key
5.1< Indicates a 5.1 decode of 6.1 material (phantom back centre).
>6.1 Indicates 6.1 output created by a 2.0 or 5.1 decode,
>6.1< Indicates 6.1 output created from 6.1 material, decoded as 5.1 and then
#Mode used to force 6.1 or EX or ES decoding where the decoder detects a disc as only 5.1 encoded but it is known to actually be EX/ES encoded (i.e. the EX or ES flags are missing from the disc). Note however that the processor cannot create ES/EX output from 5.1 encoded discs, this mode is only for when the flags are missing. To create 6.1 from a 5.1 disc use a post processed mode instead as shown above.
"Stereo or Stereo + Sub, Press Stereo Modes Button to change.
!Digital Signal Processing created modes for signals with no encoding.
%DSP Music mode has no active centre channel output, as this is not appropriate for this program type.
Note: Bold entries are being output in their native resolution/format.
18
