Connections
When designing our amplifiers we have tried to include features that allow you to connect your system in various ways. The inclusion of features such as
Basic connections
The diagram below shows the basic connection of your amplifier to a CD player and a pair of loudspeakers.
Note: If using Input 1 (Unbalanced), the Input 1 switch must be in the ‘Unbalanced’ position.
840A V2 |
840C
Speaker B connections
The Speaker B connections on the back of the amplifier allow for a second set of speakers to be used (i.e. speakers located in another room). The Speaker A/B button on the front panel allows this second set of speakers to be switched on and off.
Note: When using two pairs of speakers, use speakers with a nominal impedance of between
840A V2 |
Tape connections
The diagram below shows how to connect the amplifier to a tape recorder or other source with a record and monitor connection.
Preamp Out connections
The Preamp Out sockets are for connecting to the input sockets of a power amplifier or active subwoofer. The diagram below shows how to connect the amplifier to an active subwoofer via the Line In inputs on
the subwoofer.
Tape / MD player
Rec | Rec |
Out | In |
840A V2 |
840C
Line |
In |
Active subwoofer |
Please note that either of the tape loop outputs can be used (as they are both the same signal in parallel).
8