Remote control
The 840A V2 is supplied with an Azur Navigator remote control that operates both this amplifier and Cambridge Audio Azur CD players. Insert the supplied AAA batteries to activate.
The functions relevant to the amplifier are as follows:
Standby/On
Switches the amplifier between On and Standby mode.
Numerical buttons
Press to change the input source to the amplifier. Button 8 toggles Tape Monitor on/off.
Bright
azur | 840A V2 |
|
iPod compatibility |
| ENGLISH |
The 840A V2 remote can also control the basic functions of Apple iPod | ||
To make use of the iPod functionality, your iPod dock must be connected |
| |
to ‘Input 4’.
models when mounted in Cambridge Audio’s iPod docks, Apple’s Universal Dock or other docks compatible with the Apple Remote. Refer to your dock’s instruction manual on how to connect it to your amplifier.
To use the Azur remote to control the docked iPod, hold down the Input 4 button whilst pressing one of the following buttons:
Play/Pause
Press to play the iPod, press again to pause play.
Skip
Adjust the backlight of the front panel display; bright, dim or off.
Mode Mode
Press to switch between Volume and Balance modes.
Mute
Mutes the audio on the amplifier. The mute mode is indicated by MUTE appearing and the volume level being replaced by two flashing dashes in the display. Press again to cancel mute.
Input Input Input
Input Input Input
Input Input
Press once to skip forwards or backwards one track.
Volume
Increase or decrease the volume of the amplifier output.
The functions relevant to a connected Azur CD player are as follows:
Mode
Vol
Open/Close
Opens and closes the disc tray.
Play /
Stop /
Pause
Press the relevant button to play, stop or pause the CD.
Skip
Right Skip - Press once to skip forward by one track on the CD. Press and hold to skip forwards through tracks.
Left Skip - Press once to skip backward by one track on the CD. Press and hold to skip backwards through tracks.
Search
Press and hold to search within the selected track. Right button to fast forward, left button to rewind.
Repeat, Random, Remain
Refer to the ‘Operating instructions’ section of your CD player manual for information on the functions of these buttons.
Vol
Repeat Random Remain
7
