5)Dolby Digital indicator light: This light turns on whenever a Dolby Digital signal is detected at the SPDIF input of the DeskTop Theater 5.1. For Dolby Digital 5.1 sound reproduc- tion, make sure only this light is illuminated.
6)Surround Mode: This button cycles between Dolby Pro Logic processing of the digital input, then the analog input and no Pro Logic processing.
7)Audio Mode: Use this button to play just the left or right channels of a stereo digital signal
(PCM from an audio CD, a Video CD or a stereo signal from a DVD). Use this when, for example, a Video CD has different languages on the left and right channels.
Repeated presses of the button selects which channel is fed to both the Left and Right front speakers.
LL-Left channel to both Left and Right front speakers.
8)Speaker Test: Press this button to start the “test sound” genera- tor. Use this test sound to position all the speakers and to balance their relative output.
The test sound moves in sequence from the left satellite, the center speaker, the right satellite, then to the right surround satellite, left surround satellite and the subwoofer. All of the indicator lights will blink on and off while the test sound generator is in operation.
The test sound will operate for three complete cycles and then stop. You can terminate the sound at any point by pressing the Speaker Test button again.
First use the test sound to verify that each speaker is operating.
Then make sure the speakers are positioned so that the test sound can be clearly heard.
Finally, adjust the front panel level controls for the center, subwoofer and rear speakers. Adjust each control so its speaker achieves a balanced output level with the left and right satellites (which provide a fixed “reference” output level).
| STEREO/ | DOLBY | PRO LOGIC |
|
|
|
|
MUSIC | MOVIE FOURPOINT | DIGITAL DIGITAL IN ANALOG IN | LL | RR |
|
| |
| 4 | 5 | 6 |
| 7 | 8 | 9 |
|
|
| |||||
| CREATIVE | DOLBY SURROUND | AUDIO MODE | SPEAKER TEST | MUTE | ||
MULTI SPEAKER SURROUND |
|
|
|
|
|
| |
POWER |
DESKTOP THEATER 5.1 | 1 | MASTER | 2 | CENTER | SUBWOOFER | SURROUND |
|
|
3
All Decoder Amplifier functions except for the level controls are disabled while the test sound generator is running.
The speaker level controls operate at all times. If desired, you may adjust these controls during program material to
9)Mute: Mutes all output from the DeskTop Theater 5.1. Press the button once to mute. Press a second time to restore audio output.
The CMSS, Dolby, Audio and Speaker Test buttons operate during mute.
10
