Installation Sequence
Speaker Placement
1. Read all of the instructions |
before installing the |
speaker system. |
2. Using the placement instructions |
as a guide, position the satellites, |
the center channel speaker and |
subwoofer around your com- |
puter. Install the Desktop Stands |
and Floor Stands as appropriate. |
3. Connect the satellite speakers, |
center channel speaker, and |
subwoofer to the back of the |
Decoder Amplifier. Be sure to |
connect the subwoofer’s black |
plug to the LFE output jack and |
the center channel speaker’s |
black plug to the C output jack. |
4. Connect the SPDIF output of your |
digital program source to the |
Decoder Amplifier. Connect the |
stereo output of your sound card |
(line out) to the LINE IN of the |
6. Turn on the power. Set the |
Volume Control to approximately |
“10 o’clock”. Press the Speaker |
Test button. Use the test sound to |
verify that each speaker is |
operating properly. Then adjust |
the position of each loudspeaker |
so each can be heard clearly. |
Finally, adjust the Center, |
Subwoofer and Surround level |
controls for balanced output |
between the speakers. Press |
the Test mode button again, |
if necessary. |
7. You may wish to experiment with |
speaker placement briefly before |
concealing the connecting cables |
and making the installation |
more permanent. |
8. The unit is ready for you to enjoy. |
Refer to the Quick Reference |
guide for information about |
The Front Satellites. The front satellites play stereo music, the off- screen sounds of video playback and the front channels of four channel games.
These satellites should be placed to the sides of your monitor (see Diagram A). Be sure to have a clear line of sight from your listening position to these satellites. The satellites intended for front placement have 3 meters (9 feet) of cable.
Install the satellite’s Desktop Stands when using them on the desktop. Be sure to apply the self- adhesive feet to the Desktop Stands. The feet prevent movement on the desktop.
The satellites may also be hung on the wall behind the monitor using the screw and wall anchors provided (see “Mounting The Speakers”, page 7).
If you wish to save desktop space, use the hook and loop fasteners to attach the satellite speakers to the sides of the computer monitor (see Diagram B).
The Center Channel Speaker. The center channel speaker provides the
Decoder Amplifier. If present, |
connect the rear stereo output of |
your sound card to the REAR IN |
input of the Decoder Amplifier. |
5. Verify the Decoder Amplifier’s |
power switch is in the “off” |
position. Connect the power |
supply adapter to the |
Decoder Amplifier. |
settings for specific program |
sources like DVD, CDs, Video CD |
and games. |
A | B |
3
