See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions | CHN10510 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
1 inch 23g
Micro Pin Nailer
Table of Contents |
|
Description . . . . . . . . . . . . . . . . . . . . . | 1 |
Unpacking . . . . . . . . . . . . . . . . . . . . . . | 1 |
Safety Guidelines . . . . . . . . . . . . . . . . | 1 |
Important Safety Information . . . . . . | 1 |
Tool Components and |
|
Specifications . . . . . . . . . . . . . . . . . . . . | 2 |
Operating Instructions . . . . . . . . . . . . | 4 |
Lubrication . . . . . . . . . . . . . . . . . . . . | 4 |
Recommended Hookup . . . . . . . . . . | 4 |
Operational Mode . . . . . . . . . . . . . . | 5 |
Trigger Only Mode . . . . . . . . . . . . . . | 5 |
Loading/Unloading The Tool . . . . . . | 5 |
Adjusting Direction of Exhaust . . . . | 5 |
Clearing A Jam From The Tool . . . . | 5 |
5 | |
Interchange Information . . . . . . . . . . | 6 |
Troubleshooting Chart .. .. .. .. .. .. .. .. .. .. .. .. | 6 |
Warranty . . . . . . . . . . . . . . . . . . . . . . . | 8 |
Description
This pin nailer is designed for tacking decorative trim, glazing strips, small picture frames and cabinetry trim.. Features include: adjustable exhaust, narrow nose for fitting in tight spaces, rubber comfort grip, and trigger lock..
Safety Guidelines
This manual contains information that is very important to know and understand.. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS.. To help recognize this information, observe the following symbols..
Danger indicates an imminently
hazardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not avoided, MAY result in minor or moderate injury.
Notice indicates important
information, that if not followed, may cause damage to equipment.
NOTE: Information that requires special attention..
Important Safety Instructions
Model CHN10510
Locate model and date code on tool and record below:
Model No..: _____________________
Date Code: _____________________
Retain these numbers for
future reference..
California proposition 65
This product or
its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit.. Make sure to tighten fittings, bolts, etc.., before putting unit into service..
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
This manual contains safety, operational and maintenance information.. Contact your Campbell Hausfeld representative if you have any questions..
When using tools, basic precautions should always be followed, including
the following:
You can create dust when you cut, sand, drill or grind materials such as wood,
paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard | IN733400AV 3/10 |
Institute/International Staple, Nail and Tool Association in ANSI/ISANTA |
|
© 2010 Campbell Hausfeld / Scott Fetzer | For parts, product & service information |
| visit www.chpower.com |