Operating Instructions and Parts List | PW1350 |
Operation
1.The lance is affected by pressure during operation; therefore hold it firmly with both hands and point the nozzle toward the ground.
2.Activate by pulling the trigger of the gun/spray handle.
3.Adjust the distance to the cleaning surface, which will also adjust your pressure of the nozzle.
4.Spray pattern shape and intensity can be changed by twisting the spray adjuster at the end of the lance. Keep hands clear of the front of the lance to prevent injury. See Figure 9.
Figure 9 - Spray Adjust
End of operation
1.Press the ON/OFF switch to “OFF” on the pressure washer.
2.Disconnect the plug from the power source.
3.Shut off the water supply.
4.Activate the spray handle to relieve the machine of pressure.
5.Lock the trigger into the “OFF” position.
6.Remove high pressure hose from unit after each use.
TIP: It is best to remove all hoses when storing unit for long periods of time.
Notes
www.chpower.com8