Campbell Hausfeld NB0040 operating instructions Description, General Safety Information

110 psi

Operating Instructions Model NB0040

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop- erty damage! Retain instructions for future reference.

Brad Nailer

TM

BUILT TO LAST

Table Of Contents
General Safety	. .	1-2
Specifications	. .	. .2
Operating the Nailer		3-5
Contact Trip Safety Mechanism		. 3
Fasteners	. .	. .5
Troubleshooting		. 5
Warranty		. 6
Description
This nailer is designed for decorative trim,
molding, window casings, furniture trim
and picture frame assembly. Features
include: convenient side loading maga-
zine which holds up to 100 nails, an
adjustable exhaust with muffler, a con-
tact trip trigger, and a quick clear nose.
General Safety Information
This manual contains safety,
operational and maintenance
information.
Read this manual and under-
	MANUAL
stand all safety warnings and
instructions before operating
the nailer. Contact your Campbell
Hausfeld representative if you have any
questions.
OPERATOR’S RESPONSIBILITY:
Before operating the nailer, read and
understand all safety warnings and
labels. Follow the operating instructions
outlined in this manual.
EMPLOYER’S RESPONSIBILITY:
Distribute this instruction manual to all
users before allowing use of the nailer.
Ensure all operators read, understand
and follow all safety warnings, labels and
instructions outlined in this
manual.

Danger indicates an imminently haz-

ardous situation which, if not avoided, WILL result in death or serious injury.

●Do not use any type of flammable

gases or oxygen as
a power source for	O
the nailer. Use fil-
	CO2
tered, lubricated,
regulated com-
pressed air only.

Use of a compressed gas instead of compressed air may cause the nailer to explode which will cause death or serious personal injury.

●Do not exceed maxi- mum operating pres-

sure of the nailer (110 psi). The nailer will

not function properly.

Do not use a com-MAX. pressed air source capable of more than 200 PSI. The nailer could explode which will cause death or serious personal injury.

●Never use gasoline

or other flammable liquids to clean the nailer. Never use the

nailer in the presence

of flammable liquids or gases. Vapors could ignite by a spark and cause an explosion which will result in death or serious personal injury.

● Always remain in

a firmly balanced position when using or handling the nail-

er.

●Do not modify or disable the

Work Contact

Element (WCE).

Do not tie or tape the WCE or trigger in a depressed posi-

tion. Death or

serious personal injury could result.

Model NB0040

Locate model and serial number on tool magazine and cap and record below:

Model No. ________________________

Serial No. _________________________

Retain these numbers for

future reference.

●Do not touch the trigger

unless driving nails. Never

attach air line to nailer or carry nailer while touching

the trigger.

The tool could eject a fastener which will result in death or serious per- sonal injury.

Warning indicates a potentially haz- ardous situation which, if not avoided,

COULD result in death or serious injury.

●Always disconnect

nailer from air line before clearing jams, adjusting or servicing

the nailer, relocating the nailer, or when the nailer is not in use. Always reconnect the air line BEFORE loading any fasteners. The nailer could eject a fastener causing death or serious personal injury.

Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-1993.

© 1999 Campbell Hausfeld

For parts, product & service information IN265500AV 5/99

visit www.campbellhausfeld.com