Campbell Hausfeld NB0064 Assembly Procedure For Seals, Fasteners, Interchange Information

Operating Instructions Model NB0064

Assembly Procedure For

Seals

When repairing a nailer, the internal parts must be cleaned and lubricated. Parker O-lube or equivalent must be used on all o-rings. Each o-ring must be coated with O-lube before assembling. A small amount of oil must be used on all moving surfaces and pivots. After reassembling, a few drops of 30W non- detergent oil or equivalent, must be added through the air line before testing.

Fasteners

The following Campbell Hausfeld finishing nails are available at local retail stores. If you need help locating any item, call customer service at 1-800-543-6400. Campbell Hausfeld nails meet or exceed ASTM Standard F1667.

Model #	Length	Shank	Finish	Head	Collation	Nails Per	Nails Per
		Gauge				Stick	Box
FB003060	1-1/4”	16 Gauge	Galvanized	Brad	Adhesive	50	2500
FB004060	1-1/2”	16 Gauge	Galvanized	Brad	Adhesive	50	2500
FB004560	1-3/4”	16 Gauge	Galvanized	Brad	Adhesive	50	2500
FB005060	2”	16 Gauge	Galvanized	Brad	Adhesive	50	2500
FB006560	2-1/2”	16 Gauge	Galvanized	Brad	Adhesive	50	2500

Interchange Information

Nails used in the Campbell Hausfeld NB0064 Finishing Nailer will also work in Hitachi NT65A, Paslode 3250-F16, IM250F, Duo Fast LFN-764, Sears 18321, Porter Cable FN200 and FN250.

www.chpower.com

6