Campbell Hausfeld PW1550 Servicing of a Double- Insulated Appliance, No. de, Número del, Repuesto

Operating Instructions and Parts List PW1550

Instrucciones de montaje y lista de piezas PW1550

Servicing of a Double- Insulated Appliance

In a double-insulated product, two sys- tems of insulation are provided instead of grounding. No grounding means are pro- vided for a double-insulated product, nor should grounding means be added to the product. Servicing a double-insulated product requires extreme care and knowl- edge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the original parts. A double-insulated product is marked with the words “Double Insulation” or “Double Insulated.” Product may also be marked with symbol shown below.

Double Insulated symbol

Do not use pressure that exceeds the operating pressure of any of the parts (hoses, fittings, etc.) in the pressurized system. Ensure all equipment and accessories are rated to withstand the maximum working pressure of the unit.

Do not spray electrical apparatus and wiring.

•Never disconnect the high pressure discharge hose from the machine while the system is pressurized. To depressurize machine, turn power and water supply off, then press gun trigger 2-3 times.

•Never permanently engage the trigger mechanism on the gun.

•Never operate the machine without all components properly connected to the machine (handle, gun/wand assembly, nozzle, etc.).

Equipment damage.

• ALWAYS turn water supply “ON” before

turning pressure washer “ON.” Running

pump dry causes serious damage.

• Do not operate the pressure washer

with the inlet water screen removed.

Keep screen clear of debris and

sediment.

• NEVER operate pressure washer with

broken or missing parts. Check

equipment regularly and repair or

replace worn or damaged parts

immediately.

• Use only the nozzle supplied with this

machine.

• Never leave the wand unattended while

the machine is running.

Lista de Repuestos

Para Ordenar Repuestos o Asistencia Técnica, sírvase llamer al 1-800-330-0712

(En los Estados Unidos, o llame a su distribuidor local)

	Sírvase proporcionar la siguiente información:		Dirija toda la correspondencia a:
	- Número de modelo		Campbell Hausfeld
	- Número de serie (si lo hubiera)		Attn: Customer Service
	- Descripción y número del repuesto,		100 Mundy Memorial Drive
	según se indica en la lista de repuestos.		Mt. Juliet, TN 37122	U.S.A.
		13		5
		6
	12		8
		7
	10	3
		2		4
		1
	11		9
No. de			Número del
Ref.	Descripción		Repuesto	Ctd.
1	Adaptador de pivote		PM350100SV	1
2	Filtro		PM350101SV	1

Explosion hazard.

•NEVER spray flammable liquids or use pressure washer in areas containing combustible dust, liquids or vapors.

•Never operate this machine in a closed building or in or near an explosive environment

•Never attempt to alter factory settings. Altering factory settings could damage the unit and will void the warranty.

•Always hold gun and wand firmly when starting and operating the machine.

•NEVER allow the unit to run with the trigger released (off) for more than one

(1) minute. Resulting heat buildup will damage pump.

3	Interruptor	N/A	1
4	Manguera	PM350110SV	1
5	Pistola	PM350109SV	1
6	Lanza de rociado en abanico ajustable	PM350104AV	1
7	Soporte para la manguera y cable eléctrico	N/A	1
8	Limpiador de puntas	PM008500AV	1
9	Salida	N/A	1
10	Soporte de la pistola	PM350115SV	1
11	Entrada	N/A	1
12	Mango	N/A	1
13	Anillo en O	PM232200SV	1

www.chpower.com 4 33 Sp