Pressure Washer

Pre-Operation (Continued)

9. Install quick connect tips to tip holder and secure to the pressure washer handle. See Figure 9.

Figure 6 – Connect high pressure hose to pump

6.Connect the high pressure hose to the pump outlet (See Figures 2 and 6).

7.Attach the lance to the gun (see Figure 7).

Figure 7– Attach lance to gun

8.Install quick connect tip by pulling back on collar and pressing in tip. Release collar, make sure it completely returns to its forward position and tip is secure (see Figure 8).

Pull collar back

Figure 8 - Installing Quick Connect Tip

Figure 9 - Insert spray tips into the rubber tip holder

TRIGGER SAFETY LATCH

In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally. Push the latch fully up to engage it (See Figure 10).

Always engage the trigger safety latch when the unit is not in use.

Engaged

 

Disengaged

 

 

 

Figure 10a - Trigger locked

Figure 10b - Trigger unlocked

www.chpower.com

6