Servicio Técnico
Si desea hacer alguna pregunta refe- rente a la reparación u operación de las herramientas, o para solicitar copias adicionales de este manual, sírvase lla- mar a nuestro número especial, 1-800- 543-6400.
Sujetadores y Piezas de Repuesto
Use solamente sujetadores Campbell Hausfeld originales calibre 16 (o su equivalente) - (vea la información sobre intercambio de sujetadores). El desempeño de las herramientas, la seguridad y la duración pueden disminuir si no se utilizan los sujetadores adecuados. Cuando ordene piezas de repuesto o sujetadores, especifique el número de la pieza.
Para reparar la herramienta
La herramienta debe ser reparada úni- camente por personal calificado, y deben usar piezas de repuesto y acceso- rios originales Campbell Hausfeld, o piezas y accesorios que funcionen de manera equivalente.
Para colocarle los sellos
Cada vez que repare una herramienta deberá limpiarle y lubricarle las partes internas. Le recomendamos que use Parker O-lube o un lubricante equiva- lente en todos los anillos en O. A cada anillo en O se le debe dar un baño de lubricante para anillos antes de instalar- los. Igualmente, deberá ponerle un poco de aceite a todas las piezas que se mueven y muñones. Finalmente, después de haberla ensamblado y antes de probar la herramienta deberá ponerle unas cuantas gotas de aceite sin detergente 30W u otro aceite simi- lar, en las líneas de aire.
General Safety Information (Continued)
●Always assume the tool contains fasteners. Respect the tool as a working implement; no horseplay. Always keep others at a safe dis- tance from the work area in case of accidental discharge of fasteners. Do not point the tool toward your- self or anyone whether it contains fasteners or not. Accidental trigger- ing of the tool could result in death or serious personal injury.
●Do not drive a fas-
tener on top of other fasteners. The fastener could glance and cause death or a serious puncture wound.
●Do not operate
or allow anyone
else to operate the tool if any warnings or warning labels
not use the tool if any shields or guards are removed or altered. Do not use the tool as a hammer. Personal injury or tool
damage may occur.
●Avoid long extended periods of work with the tool. Stop using the tool if you feel pain in hands or arms.
●Always check that the Work Contact Element (WCE) is operating proper- ly. A fastener
could acciden- tally be driven if the WCE is not working properly. Personal injury may occur (See
"Checking the
Work Contact Element" Section).
● Disconnect air supply and release |
tension from the pusher before |
attempting to clear jams because |
tools can be ejected from the front |
of the tool. Personal injury may |
Standard for Compressors for Process Industries. Contact your air compressor manufacturer for
information.
Operating The Tool
LUBRICATION
This tool requires lubrication before using the tool for the first time and before each use. If an inline oiler is used, manual lubrication through the air inlet is not required on a daily basis.
The work surface can become damaged by exces- sive lubrication. Proper lubrication is the owner’s responsibil- ity. Failure to lubricate the tool properly will dramati- cally shorten the life of the tool and
Sujetadores
Grapas
Estas grapas para acabado de Campbell Hausfeld los puede comprar en su tienda más cercana. Si necesita ayuda para encon- trar un artículo, comuníquese al 1-800-543-6400. Las grapas de Campbell Hausfeld cumplen o exceden las especificaciones Federales FF-N-105B.
| | Calibre | | | | Fusión de | Grapas | Grapas |
Modelo # | Longitud | de la grapa | Corona | Punta | Acabado | la linea | por linea | por caja |
| | | | | | | | |
| | | | | | | | |
FN180615AV | 12,7mm (1/2”) | Calibre 18 | 6,4mm(1/4") | Cincel | Galvanizado/Cubierta por vinilo | Adhesivo | 100 | 1000 |
FN180620AV | 19,1mm (3/4”) | Calibre 18 | 6,4mm(1/4") | Cincel | Galvanizado/Cubierta por vinilo | Adhesivo | 100 | 1000 |
FN180625AV | 25,4mm (1”) | Calibre 18 | 6,4mm(1/4") | Cincel | Galvanizado/Cubierta por vinilo | Adhesivo | 100 | 1000 |
FN180630AV | 31,8mm (1 1/4”) | Calibre 18 | 6,4mm(1/4") | Cincel | Galvanizado/Cubierta por vinilo | Adhesivo | 100 | 1000 |
| | | | | | | | |
are not legible. Warnings or warning labels are located on the tool maga- zine and body.
●Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, exam- ine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur.
Caution indicates a potentially hazardous situa- tion which, if not avoided, MAY result in minor or moderate injury.
●Do not make any modifications to the tool without first obtaining written approval from Campbell Hausfeld. Do
Notice indicates important information, that
if not followed, MAY cause damage to equipment.
●Avoid using the tool when the mag- azine is empty. Accelerated wear on the tool may occur.
●Clean and check all air supply hoses and fittings before connecting the tool to an air supply. Replace any damaged or worn hoses or fittings. Tool performance or durability may be reduced.
●Air compressors providing air to the tool should follow the requirements established by the American National Standards Institute Standard B19.3-1991; Safety
void the warranty.
1. Disconnect the air supply from the tool to add lubricant.
2.Turn the tool so the
air inlet is facing up. OIL
Place 4-5 drops of 30 W non-detergent oil into air inlet. Do not
use detergent oils,
oil additives, or air tool oils. Air tool oils contain solvents which will dam- age the tool's internal components.
Información de intercambio
Las grapas usadas con la SN318K00 también se pueden usar con las grapadoras: Senco LN4450, SJS-LR, SKS L11-15, Hitachi N3804A, Duofast BN-1832S, KN-1848, ST-18, Stan-Tech SDS 18-14, Atro Minor 90/30, 90/32, 90/40, y Porter Cable NS100.
Recommended Hookup | | | | | Quick Plug | | | | Regulator |
| Quick | | Quick | | | | |
| | | (Optional) | | Oiler | | | | |
| Plug | Coupler | | | | | |
| |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
Quick
Coupler (Optional)
Air
Hose
Filter
www.chpower.com
