Cannon 10855G, 10850G, 10856G Installation Instructions, Conversion For Use On Butane Or Propane

INSTALLATION INSTRUCTIONS

CONVERSION FOR USE ON BUTANE OR PROPANE

Each hob burner requires the injector to be replaced and each burner gas tap to have the by-pass screw adjusted according to the following procedure:

1.Lift off the burner cap and the burner body and place it to one side.

2.Remove the injector from the burner base with a suitable box spanner and discard.

3.Replace the injector with the appropriate replacement (see Table on page 28).

4.Repeat for each burner.

5.Replace the burner bodies and caps, taking care that they are positioned correctly.

6.Remove the tap knob from the left hand hotplate tap. Insert a narrow flat screwdriver centre of the tap spindle and turn fully clockwise. Replace the tap knob. Repeat this procedure with the other six hotplate taps.

7.Position and fix the self-adhesive LPG conversion label over the gas details on the rating plate label.

27