Cannon 10855G, 10850G, 10856G installation instructions Care And Cleaning

Models: 10856G 10850G 10855G

1 32
Download 32 pages 55.56 Kb
Page 21
Image 21
CARE AND CLEANING

CARE AND CLEANING

WARNING: NEVER USE STEAM CLEANERS.

Switch off the electricity supply and allow to cool before cleaning the cooker.

Clean the cooker regularly and wipe up spills soon after they occur to prevent them from becoming burnt on. Never use biological washing powder, caustic cleaners, harsh abrasives, scouring pads, steam cleaners, aerosol cleaners or oven chemical cleaners of any kind.

Before moving your cooker ensure that it is cool and note that it is heavy so you may require assistance. The cooker is fitted with rear wheels and will slide in and out of position easily. Movement of your cooker is most easily achieved as follows:

Open the grill/oven door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding contact with any grill or oven furniture and then lift and slide at the same time.

When repositioning the cooker, ensure that it is level. Take care to ensure that any floor covering is not damaged.

‘HEAT CLEAN’ LINERS

The oven linings are coated with a special enamel which has a continuous cleaning action. The higher the oven temperature the more effective the action. In most cases this cleaning operation will proceed during normal cooking.

However, if high temperatures are not used regularly it may be necessary to run the oven empty at maximum setting for one hour. If desired, they can be wiped over with a soapy cloth followed by a wipe with a clean, damp cloth.

REPLACEMENT OF OVEN LIGHT BULB

CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE LAMP TO AVOID THE POSSIBILITY OF AN ELECTRIC SHOCK Light bulbs are not covered by the manufacturer’s guarantee.

A new 15W, 300˚C rated SES bulb can be obtained from your cooker supplier or any major electrical retailer.

1.Remove the shelves from the oven.

2.Unscrew the lens using a thick cloth to protect your fingers in the unlikely event of a lens fracture.

3.Unscrew bulb.

4.Fit new bulb and refit lens.

21

Page 21
Image 21
Cannon 10855G, 10850G, 10856G installation instructions Care And Cleaning