Cannon 10425G, ICON 1000 Timer Function Buttons, Setting The Minute Minder, 0.20, Step

CLOCK/MINUTE MINDER OPERATION

TIMER FUNCTION BUTTONS

Minute Minder

Here you can set a time period of up to 23 hours 59 minutes, that will count down. When it reaches zero, the timer will emit an audible tone. For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.

Bell Symbol

0.20

13.23

SETTING THE MINUTE MINDER

Step 1 Ensure the time of day is set correctly.

Step 2 Press and release the ‘-’ button, a symbol will light up.

Step 3 Within 4 seconds press the ‘+’ button to set the correct period of time required.

Release the ‘+’ button.

The time is set and will continue to count down and the symbol will be lit.

At the end of the set time a bleeping sound will be heard and the symbol will flash for approximately 2 minutes.

After approximately 2 minutes the bleeping sound will stop. To cancel thesymbol flashing, press the ‘-’ button once.

Step 4	To cancel the bleeping sound and the symbol, within the
	2 minutes, press the ‘-’ button.

To cancel the minute minder period press the ‘-’ button. Press the ‘-’ button again until the display shows 0.00 After 5 seconds the display will return to the time of day.

If at any time the display shows flashing zero’s / AUTO, it is likely that the electricity supply has been interrupted.

Reset the timer to the correct time of day.

NOTE:	WHEN THE MINUTE MINDER HAS BEEN SET, THE DISPLAY
	WILL REVERT TO SHOW THE TIME OF DAY.
	ANY REMAINING TIMED PERIOD CAN BE VIEWED BY
	PRESSING THE ‘-’ BUTTON.

7