Cannon ICON 1000, 10425G installation instructions Something Wrong With Your Cooker, Problem, Check

Models: 10425G ICON 1000

1 28
Download 28 pages 62.21 Kb
Page 20
Image 20
SOMETHING WRONG

SOMETHING WRONG

WITH YOUR COOKER

Before contacting your Service Centre or Installer, check the problem guide below, there may be nothing wrong with your cooker.

PROBLEM

CHECK

 

 

Slight odour or small amount

This is normal and should cease after a short period.

of smoke when grill/oven

 

 

used for first time.

 

 

 

 

Oven cooks too fast or too

Check that the oven setting and shelf positions are as

recommended in the Cooking Charts. However, it

slow.

may be necessary to increase or decrease the recom-

 

 

mended setting slightly to suit your taste.

 

 

Ignition does not work.

If all burners fail to ignite:

 

Check that sparks appear at the burners; a clicking

 

noise should be heard.

 

If not

 

 

(i)

Check that the electricity supply is turned on.

 

(ii) Check other appliances to see if you have had a

 

 

power cut.

 

If only one burner fails to ignite:

 

(i)

Check the burner cap is seated correctly.

 

(ii) Check the slots in the burner bodies are not

 

 

blocked with any soap residue or cooking soil

 

 

(see care and cleaning).

 

(iii) Check, if the burners have recently been

 

 

cleaned using a wire wool pad eg. “Brillo Pad’,

 

 

ensure that no stray strands are caught on the

 

 

igniter or burner body.

 

NOTE. Satisfactory ignition will only be achieved if all

 

the hotplate burners are fitted.

 

In the event of an electricity failure, all burners can be

 

lit with a match.

 

 

Timer Display shows ‘0:00’

The electricity supply to the cooker may have been

interrupted but has now come back on again. Set

 

 

the correct time of day by following the instructions

 

given in the Timer section of this book.

 

 

 

If there is still a problem contact your local Service office

(see KEY CONTACTS, back page.

20

Page 20
Image 20
Cannon ICON 1000, 10425G installation instructions Something Wrong With Your Cooker, Problem, Check