Cannon 10425G, ICON 1000 installation instructions Cooker Finish Cleaning Method, Vitreous Enamel

CARE AND CLEANING

COOKER FINISH	CLEANING METHOD
Vitreous Enamel	Cloth wrung out in warm soapy water. Stubborn
Hotplate, pan supports,	stains can be removed with a cream paste,
burner caps, roasting dish,	liquid cleaner or by rubbing with fine steel wool
grill pan, oven base, rear and	soap pads e.g. Brillo, Ajax.
roof, door inner panels, grill	Check that the cleaning agent is approved by the
compartment, control panel.	Vitreous Enamel Association.
Paint	Wash with a cloth wrung out in warm soapy water
Side panels, central trim, end	only. DO NOT USE ABRASIVE CLEANERS / POWDERS OR
caps.
	SCOURING PADS WHICH MAY SCRATCH THE SURFACE.
Aluminium	Similar to paint cleaning above. Use a nylon brush to
	remove any cleaning materials, water or dirt from
Burner bodies..
	the hotplate burner ports. Care should be taken
	when refitting the bodies over the electrodes.
Glass	As for enamel cleaning. Polish with a clean dry cloth
	or kitchen roll.
Chromium Plating	Wipe with a cloth wrung out in warm soapy water.
Oven shelves, grill pan grid,	A fine steel wool soap pad e.g. Brillo, Ajax, or a
grill pan handle support	chrome or stainless steel cleaner may be used.
Plastic	Wipe with a cloth wrung out in warm soapy water.
Grill pan handle, control	Stubborn stains can be removed with a cream
knobs.	cleaner.
	To ensure rapid lighting of the hotplate burners
	every time they are used, the electrodes must be
Hotplate Burners	kept clean and dry. Remove any food spillage or
	cleaning materials from the electrode using a small
	nylon brush such as a toothbrush.
Stainless Steel	Wipe with a cloth wrung out in warm soapy water.
Door trims, door handles,
	Do not use chlorine based cleaners.
control knobs.

19