INSTALLATION INSTRUCTIONS
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the following parts are present.
Grill pan and grid Baking dish
Main oven shelves (3) Aluminium burner bodies (4) Literature
Top oven/grill shelf heat shield Pan supports (2)
Enamelled burner caps (5) Main oven shelf heat shield Top oven/grill shelf (1)
LEVELLING
Two rear wheels and two front feet are fitted which can be adjusted up or down to set the height (900mm - 915mm) and level the cooker.
1.The rear wheels can be raised or lowered from the BACK of the cooker by adjusting the levelling screws ‘A’ in the plinth.
2.The front feet can be simply screwed in or out to lower or raise the front of the cooker.
CAUTION: Some soft floor coverings may get damaged if the cooker is not moved carefully.
Viewed from rear
STABILITY BRACKET
The back of the cooker has a slot for engagement of a stability bracket, which can be obtained, as an extra, from your cooker supplier.
125mm
REAR OF
STABILITYCOOKER BRACKET
POSITION
SLOT FOR
STABILITY
BRACKET
32
