ç Contents | ç Chapter Contents | 127 |
•After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
•Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [h].
•To have the setting you did not configure in step 2
(whether shutter speed or aperture value) automatically adjusted to obtain standard exposure, hold the shutter button halfway and press the <b> button. Note that standard exposure may not be possible with some settings.
•[D]: Manual
•Calculation of standard exposure is based on the specified metering method (=98).