ç Contents | ç Chapter Contents | 64 |
• When you specify multiple shots, image brightness and white balance are determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full.
•When a delay longer than two seconds is specified, two seconds before the shot, the lamp blinking and
Still Images
Adding a Date StampThe camera can add the shooting date to images, in the lower- right corner.
However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct (=26).
1 Configure the setting.
zzPress the <n> button, choose [Date Stamp ] on the [4] tab, and then choose the desired option (=45).
zzOnce the setting is complete, [ ] is displayed.