ç Contents

ç Chapter Contents

145

Choosing Images Individually

1Choose [Select]. zzFollowing step 2 in “Using

the Menu” (=144), choose [Select] and press the <m> button.

2Choose an image. zzPress the <q><r> buttons or

turn the <5> dial to choose an image, and then press the <m> button. [] is displayed.

zzTo cancel selection, press the <m> button again. [] is no longer displayed.

zzRepeat this process to specify other images.

3Protect the image. zzPress the <n> button.

A confirmation message is displayed.

zzPress the <q><r> buttons or turn the <5> dial to choose [OK], and then press the <m> button.

•Images will not be protected if you switch to Shooting

mode or turn the camera off before finishing the setup process in step 3.