Documents
The flatbed can scan documents ranging from 8.5" (216 mm) to 14.0" (356 mm) in size.
Placing Documents
Open the document cover, and place the document on the scanning glass, as shown below, with the scanning side facing down. Make sure the bottom right corner of the scanning side is aligned with the bottom left corner of the scanning glass. Close the document cover.
IMPORTANT
•Do not place objects other than the document to be scanned onto the scanning glass. Doing so may result in damage or personal injury.
•Open and close the document cover gently. Excessive force may result in damage to the cover or breaking the scanning glass and personal injury.
•Depending on your scanning application, you may have to align the top left corner of the document with the top right corner of the scanning glass when placing the document.
•You cannot scan film.
•Make sure to straighten wrinkled or curled documents before placing them on the flatbed, and gently press down on the document cover while scanning is in progress.
When Scanning with the Document Cover Folded
The document cover can be set to two positions when folded. Each position exposes an A5R or LTR/A4 size area, respectively, on the scanning glass, enabling easy document placement during continuous scanning of multiple documents.
Adjust the document cover into one of the three positions based on the size of the document placed on the scanning glass.
A5R Document | LTR/A4 Document | |
Position | Position | Position |
IMPORTANT
Be careful when folding the document cover to avoid pinching your hands.
NOTE
Make sure to click the [Ambient Light Canceling Mode] check box under <Scanning Side> on the driver settings screen when you scan with the document cover folded. (See “Scanner Settings” on p. 22.)
15