13 When scanning is complete, select [Exit] from the [File] menu to exit CapturePerfect.

Scanner Settings

When you open the settings dialog box for your scanner while the flatbed is connected, you can configure scan conditions with the following settings.

IMPORTANT

Make sure to configure the [Main Scanner/Flatbed] setting first. The settings in the scanner settings dialog box are saved separately for each selection option of the [Main Scanner/Flatbed] setting. If you change the [Main Scanner/Flatbed] option midway through configurations, any settings configured before the change will be disabled.

[User Preference]

Enter a name and click [Save]. You can recall the name and its configurations in the settings dialog box, whenever necessary.

[Main Scanner/Flatbed]

Select [Flatbed] to scan the document placed on the flatbed. Select [Main Scanner] to scan documents placed in the feeder of the connected Canon DR-series scanner.

If you select [Auto], the scanner in which the document is placed is detected automatically.

For details, see “Using Two Scanners” on p. 26.

22