3

Select the scanner you are using (the name of the

6

Click [Scanner Setting], and configure the scanner

 

connected Canon DR-series scanner should be followed

 

settings.

 

by “w/flatbed”), and click [Settings].

 

 

4

5

The [Configure Device Settings] dialog box appears.

IMPORTANT

If the flatbed and the Canon DR-series scanner are connected properly, “w/flatbed” should appear after the scanner name. If only the scanner name appears, try reinstalling the software included on the setup disc provided with the flatbed.

Click [OK] to finish scanner selection.

Select [Scan Batch to File] from the [Scan] menu.

The properties dialog box for the scanner driver appears.

The [Scan Batch to File Setting] dialog box appears.

20