Canon 10, 20 Auto Exposure Bracketing, Recording from a Tape in the Camcorder

108
Using a Memory Card
E
❍The setting resets to [SINGLE] when you turn the camcorder off.
❍Maximum number of continuous shots at one time (at 16 MB or more
available capacity):
*These figures are approximate and vary with the recording conditions and subjects.
❍If you attach the optional VFL-1 Video Flash Light, the practical range of the
flash in the Continuous Shooting mode is approx. 3.3 ft. (1 m) to 6.6 ft. (2 m).
Auto Exposure Bracketing
With Auto Exposure Bracketing (AEB), the camcorder records a still image in three
different exposures (dark, normal, light), allowing you to choose the perfect exposed shot.
1. Set the camcorder to CARD CAMERA mode.
2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], set
it to [AEB ] and close the menu.
3. Press the PHOTO button.
Three still images in different exposures are recorded to the memory card.
The setting resets to [SINGLE] when you turn the camcorder off.
Recording from a Tape in the Camcorder
You can record images from a tape in the camcorder as still images on a memory card.
1. Set the camcorder to PLAY (VCR) mode.
2. Play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
•The camcorder pauses playback. The remaining image capacity and other information
appear.
•When you press the PHOTO button on the wireless controller, recording starts
immediately.
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)
CAMERA
CARD PLAY (VCR)
CARD CAMERA
PLAY (VCR)CAMERA
DRIVE MODE•••SINGLE
CAMERA SET UP
(43)
1280 × 960 Flash ON/OFF 2 frames 10 images
640 × 480 Flash OFF 3 frames 30 images
Flash ON 2 frames 10 images
Still Image Size Optional VFL-1
Attached
Frames per
Second Maximum Number
of Continuous Shots