2.Set the administrator password.
Enter the password in the [Password] box, and reenter it in the [Confirm Password] box to confirm.
After entering the password, press [Next]. The network configuration screen appears.
How to input text
Press the 
icon next to the input box to display the soft keyboard on the screen and enable text entry. When you finish entering the text, press [OK] to close the soft keyboard.
Hint
If you press [Next] without entering a password, the password will be left unconfigured and password entry will not be required for starting the device. To ensure security, we recommend configuring the password.
3.Configure network settings for the device.
Configure the following settings.
Device Name
Enter a name for the device. This is the name that will appear for the device on the network.
IP Address
Enter a unique IP address to assign the device.
IMPORTANT
You must assign the device a static IP address. Consult your network administrator to determine a static IP address for the device.
Subnet Mask
Enter the subnet mask of the network to which the device will be connected. For details, contact your network administrator.
Default Gateway
Enter the default gateway of the network to which the device will be connected. For details, contact your network administrator.
21