Canon 220E, 220EP ❏Placing a Cards (Business Card, Plastic Card)

IMPORTANT

Up to 50 sheets of ordinary paper can be loaded into the document feed tray. When placing the document, make sure the size of stack does not exceed the loading marks on the document guides.

Loading mark

❏Placing a Cards (Business Card, Plastic Card)

When you want to scan a card, follow the procedure below to place the card.

1.Move the feed selection lever upward (bypass feeding).

IMPORTANT

When scanning cards, set the feed selection lever to bypass feeding and make sure to scan the cards one at a time.

2.Adjust the document guides to match the width of the card.

3.Place the card face down in the landscape orientation with the top edge at the bottom of the tray.

CAUTION

•A card placed into the document feed tray in the portrait orientation may not be output properly because a load is placed on it during feeding. Furthermore, removing a card that has caused a feeding error may damage the card, so make sure to correctly insert the card.

•Pull the lock lever and open the panel unit before removing a placed card. Inserting a finger into the device while the panel unit is closed may result in an injury.

Lock lever

31