1. Important Safety Instructions
To ensure the safe operation of this device, be sure to read the safety warnings and precautions described below.
❏Installation Location
The performance of this device is affected by the environment in which it is installed. Make sure that the location where the device is installed meets the following environmental requirements.
●Provide adequate space around the device for operation, maintenance, and ventilation.
At least 15.75" (400 mm)
At least
23.62" (600 mm)
●Avoid installing the machine in direct sunlight. If this is unavoidable, use curtains to shade the device.
●Avoid locations where a considerable amount of dust accumulates.
●Avoid warm or humid locations, such as in the vicinity of a water faucet, water heater, or humidifier, and avoid locations where the fumes from ammonia, paint thinner, or other volatile chemicals may be present.
●Avoid locations that are subject to vibration.
●Avoid exposing the device to rapid changes in temperature. If the room in which the device is installed is cold but rapidly heated, water droplets (condensation) may form inside the device. This may result in a noticeable degradation in scanning quality.
The following conditions are recommended for optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to
90.5 °F)
Humidity: 20% to 80% RH
●Avoid installing the device near equipment that generates a magnetic field (e.g. speakers, televisions, or radios).
❏Power
●Connect only to a power outlet of the rated voltage and power supply frequency (either 120 V, 60 Hz or
●Do not connect other electrical equipment to the same power outlet to which the device is connected. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the device.
●Never try to disassemble the AC adapter or modify it in any way, as this is extremely dangerous.
●The power cord and AC adapter may become damaged if they are often stepped on or if heavy objects are placed on them. Continued use of a damaged power cord and AC adapter can lead to an accident, such as a fire or electrical shock.
●Do not use the power cord while it is coiled.
5