Installing the Batteries

Use four size-AA/LR6 batteries.

1

Open the cover.

 

 

Slide the battery compartment cover

 

as shown by the arrow, then flip up

 

the edge.

 

2 Insert the batteries.

 

Make sure the + and - battery

 

contacts are properly oriented as

 

shown in the compartment.

3 Close the cover.

 

 

Push down the cover and slide it

 

back.

 

Recycling Time and Flash

ount

 

Battery Type

Recycling Time

Flash Count

Size-AA/LR6 alkaline batteries

Approx. 0.1 - 7 sec.

Approx. 120 - 800

Based on a new set of batteries and Canon’s testing standards.

The figures are the same for both flash tubes/heads firing or single tube/head firing.

This applies to both the MR-14EX and MT-24EX.

Use a new set of four batteries of the same brand. When replacing the batteries, replace all four at one time.

Using size-AA batteries other than the alkaline type (LR6) may cause improper battery contact due to the irregular shape of the battery contacts.

Size-AA Ni-MH (HR6) or lithium (FR6) batteries can also be used.

10