1Set the MR-14EX or MT-24EX as the master unit.

Press the <D> button to select

<a>.

Press the <f> button to select <yk>.

X <w> will be displayed. Press the <e> button to select a channel 1 to 4.

2 Set the slave unit.

Set the same channel as with the master unit.

Set the ID to <C>.

As for the setting procedure, refer to the slave Speedlite’s instruction manual.

3 Position the slave unit(s).

Face the slave unit C’s sensor toward the master unit.

Do not put any obstructions between the master unit and slave unit(s) C.

4 Check that the flash is ready. When the slave unit(s) C is ready to fire, the AF-assist beam will blink for 1 sec.

33