Using AF to FocusN

2 Select the AF point.

Press the <o> button, then use <9> to select the AF point.

If you keep tilting <9> in the same direction, it will toggle between manual and automatic AF point selection.

3 Focus the subject.

Aim the AF point over the subject, and hold down the <p> button.

X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed.

XWhen focus is achieved, the beeper will sound and the Live View image will reappear.

XThe AF point used to focus will be displayed in red.

4 Take the picture.

Check the focus and exposure, then press the shutter button to take the picture (p.110).

You cannot take a picture during autofocusing. Take the picture only while the Live View image is displayed.

Autofocus will not work with the release button on Remote Switch RS-80N3 and Timer Remote Controller TC-80N3 (both sold separately).

114