3Checking the Battery Information

You can check the battery’s condition on the LCD monitor. The Battery Pack LP-E6 has a unique serial No., and you can register multiple battery packs to the camera. When you use this feature, you can check the registered battery pack’s remaining capacity and operation history.

 

 

 

 

 

 

Select [Battery info.].

 

 

 

 

 

 

 

 

 

 

 

Under the [7] tab, select [Battery

 

 

 

 

 

 

 

 

 

 

 

info.], then press <0>.

 

 

 

 

 

 

 

X The battery info screen will appear.

Battery position

 

 

 

 

 

 

Model of the battery or household power

 

 

 

 

 

 

 

 

 

source being used.

 

 

 

 

 

 

 

 

 

Remaining battery capacity displayed by the

 

 

 

 

 

 

 

 

 

battery check display (p.28) in 1% increments.

 

 

 

 

 

 

 

 

 

Shutter count or shots taken with the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

current battery. The number is reset when

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the battery is recharged.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery’s recharge performance level is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

displayed in one of three levels.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Green): Battery’s recharge

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

performance is fine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Green): Battery’s recharge performance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is slightly degraded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Red): Purchasing a new battery is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recommended.

Do not use any battery other than the Battery Pack LP-E6. Otherwise, the camera’s full performance may not be attained or malfunction can result.

If you use two LP-E6 battery packs in the Battery Grip BG-E6, battery information for the two battery packs will appear.

When size-AA/LR6 batteries are used in the Battery Grip BG-E6, only the battery check display will be displayed.

If for some reason, communication with the battery is not successful, the

battery check display will show < > on the LCD panel and in the viewfinder. [Cannot communicate with battery] will be displayed. Just select [OK] and you can continue shooting.

192