Attaching and Detaching a Lens 
Attaching a Lens
1
Remove the caps.
Remove the rear lens cap and the body cap by turning them as shown by the arrow.
2 Attach the lens.
Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place.
3 On the lens, set the focus mode switch to <AF> (autofocus).
If it is set to <MF> (manual focus), autofocus will not operate.
4 Remove the front lens cap.
Do not look at the sun directly through any lens. Doing so may cause loss of vision.
The camera cannot be used with
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the body cap to the camera.
Remove dust on the body cap before attaching it.
31