Changing Image Playback Settings

3Setting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.

1 2

Select [LCD brightness].

Under the [6] tab, select [LCD brightness], then press <0>.

Adjust the brightness.

While referring to the gray chart, turn the <5> dial, then press <0>.

To check the image’s exposure, you should look at the histogram (p.118).

3Setting the Image Review Time

How long the image is displayed on the LCD monitor immediately after capture can be set. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off].

1 Select [Review time].

Under the [1] tab, select [Review time], then press <0>.

2 Set the desired review time.

Turn the <5> dial to select the time, then press <0>.

If [Hold] is set, the image will be displayed until the auto power off time elapses.

125